Search the whole station
Specially designed for dusty, humid or heavy packaging environments, the side-mounted movement is designed to effectively prevent the card machine caused by debris falling, support continuous strapping of up to 60 lanes per minute, seamlessly integrate automated assembly lines, and supply large-scale demand.
Packing speed:
800 pieces/minute
Applicable bandwidth:
5-15.5mm
Maximum tension:
70kg
In view of the high dust environment such as sawmill or brick factory, the movement of the Automatic Side-Seal Strapping Machines is placed on the side, so that the debris will fall naturally instead of accumulating in the movement, and the maintenance period will be extended to more than 3 times that of the same type of bottom sealing machine.
Equipped with a high-performance servo motor to achieve a strapping speed of up to 60 straps per minute. When dealing with high-throughput production lines such as home appliances or building materials, the overall packaging efficiency is 45% higher than that of traditional semi-automatic models.
The panel knob can be adjusted steplessly from 5kg to 70kg. For fragile foam products or hard wood, it can provide constant binding force and reduce the packaging breakage rate to less than 0.1%.
Compatible with 5mm, 6mm, 9mm, 12mm and 15.5mm PP or PET strap. When replacing packing belts of different specifications, only adjust the width of the guide rail through hexagonal wrench, and the downtime of changing belts shall be controlled within 3 minutes.
In the event of an empty beating (no packaging binding), the machine will automatically remove the belt loop and re-feed the belt. When the sensor detects that the belt is not in place, it will automatically retry to ensure that the fault self-healing rate reaches 98% when the assembly line is unattended.
The table height can be as low as 450mm and is designed for heavy goods weighing more than 50kg. Without lifting the goods can be smoothly connected to the conveyor line, the load-bearing capacity of up to 100kg/㎡, greatly reducing the labor intensity of operators.
| Parameter item | Specifications |
| Product Type | Automatic Side-Seal Strapping Machine |
| Applicable packing straps | PP/PET tape |
| Packing tape width | 5mm, 6mm, 9mm, 12mm, 15.5mm (adjustable) |
| Packing strap thickness | 0.55mm – 0.75mm |
| Packaging speed | Up to 60 straps/min (depending on frame size) |
| Maximum binding force | 5kg – 70kg (electronically adjustable) |
| Standard frame size | 600mm wide x 600mm high (customizable up to W1600mm x H2400mm) |
| Table height | 450mm – 850mm (adjustable) |
| Power specifications | 110V/220V/380V, 50/60Hz, 3-Phase |
| control system | PLC Control + Touchscreen HMI |
| Net weight of the fuselage | Approximately 220kg – 350kg |
| noise level | < 75 dB (A) |
Compared with manual and hand-held pneumatic tools: a double leap in efficiency and consistency
The biggest advantage of Automatic Side-Seal Strapping Machines is the continuity and standardization of its operations. When handling large quantities of heavy goods, compared with skilled workers using hand-held pneumatic balers, the single packaging cycle of this equipment is shortened to 1.5-2.5 seconds, and the overall production beat is improved by about 400. More importantly, it completely solves the common problem of “uneven tightening force” in manual packing, and ensures that the tension deviation of each strapping band is controlled within ± 5N through servo electric control technology, effectively avoiding the risk of loose packing or product damage caused by human fatigue.
Using the principle of lateral gravity, the problem of sliding belt and poor adhesion caused by wood chips, foam particles or ceramic dust falling into the movement is solved to ensure continuous and stable operation.
Aiming at the humid environment, the problem of electrical short circuit caused by water droplets or melting ice water directly flowing into the bottom motor and circuit board is solved, and the side seal structure effectively isolates the liquid.
For heavy objects above 50kg, the risk of work injury and cargo dumping caused by manual handling or machine jacking are solved, and the smooth transition of horizontal water flow is realized.
Suitable for plank or log strapping scenarios that produce a lot of sawdust dust. The dust-proof characteristics of the Automatic Side-Seal Strapping Machines ensure all-weather operation in a sawdust-flying environment without frequent downtime to clean the movement.
Specially designed to deal with dripping, frosting products packaging line design. The side seal structure prevents salt water from corroding the core components, and is suitable for rapid and hygienic automatic binding of seafood boxes and frozen meat boxes in low-temperature and high-humidity workshops.
For bricks, tiles and concrete products that produce abrasive dust. The machine’s highly wear-resistant components and side design can resist the invasion of abrasive dust and meet the high-load and heavy-weight packaging requirements of the building materials industry.
End packaging for large heavy goods such as refrigerators and washing machines. With its large frame customization capability and low-table conveyor system, it solves the problem of packaging large appliances directly on the wire body without additional manual assistance.
01
Open the right tape reel bin, load the PP/PET tape, and thread the tape into the tape storage box according to the schematic diagram. Turn on the power, the machine automatically completes the first tape delivery, and the preheating time only takes 20 seconds.
02
Set the target tension through the control panel knob (recommendation: carton 30kg, wooden box 60kg). Select “Auto” mode to enable photo-inductive triggering, or “Manual” for footswitch control.
03
Adjust the height of the Automatic Side-Seal Strapping Machines to be flush with the assembly line. Set the photoelectric sensor delay time to ensure that the binding action is triggered when the goods stay in the center of the frame.
04
After each shift, use an air gun to clean the dust from the side movement area. Check whether there is any residue on the hot head every week to ensure that the hot melt bonding efficiency is above 90% each time.
This model is usually compatible with PP (polypropylene) and PET (polyester) packing tape. PP belt is suitable for light and medium packaging, PET belt is suitable for heavy building materials packaging. Depending on the model, the supported bandwidth range is usually between 5mm and 15.5mm.
The movement of the bottom-sealed machine is located directly below the table top. Dust and debris will fall directly into the movement due to gravity and cause seizure. The side seal moves the movement to the side, and the debris will naturally fall to the bottom tray of the machine, greatly reducing the failure rate.
Yes. The Automatic Side-Seal Strapping Machines is equipped with input/output signal interfaces as standard, which can communicate with upstream and downstream conveyor equipment to achieve fully automated unmanned strapping operations.
In the standard frame size, the cycle speed of the high-performance model can reach 60 straps/min. The actual output speed depends on the package size and the number of packing lanes required for each package.
No need. As long as the carton size is within the frame specifications (such as W850 x H600), the machine will automatically sense the goods and complete the strapping. However, if the package is very different, it is recommended to fine-tune the tension to prevent the small package from being damaged.
The main wearing parts include heater blade, middle knife and cutter. Under normal use and maintenance, the life of the hot head is usually 50-800000 strapping cycles and the cutter is about 1 million cycles.
Specially designed for dusty, humid or heavy packaging environments, the side-mounted movement is designed to effectively prevent the card machine caused by debris falling, support continuous strapping of up to 60 lanes per minute, seamlessly integrate automated assembly lines, and supply large-scale demand.
Packing speed:
60 lanes/min
Applicable bandwidth:
5-15.5mm
Maximum tension:
70kg
In view of the high dust environment such as sawmill or brick factory, the movement of the Automatic Side-Seal Strapping Machines is placed on the side, so that the debris will fall naturally instead of accumulating in the movement, and the maintenance period will be extended to more than 3 times that of the same type of bottom sealing machine.
Equipped with a high-performance servo motor to achieve a strapping speed of up to 60 straps per minute. When dealing with high-throughput production lines such as home appliances or building materials, the overall packaging efficiency is 45% higher than that of traditional semi-automatic models.
The panel knob can be adjusted steplessly from 5kg to 70kg. For fragile foam products or hard wood, it can provide constant binding force and reduce the packaging breakage rate to less than 0.1%.
Compatible with 5mm, 6mm, 9mm, 12mm and 15.5mm PP or PET strap. When replacing packing belts of different specifications, only adjust the width of the guide rail through hexagonal wrench, and the downtime of changing belts shall be controlled within 3 minutes.
In the event of an empty beating (no packaging binding), the machine will automatically remove the belt loop and re-feed the belt. When the sensor detects that the belt is not in place, it will automatically retry to ensure that the fault self-healing rate reaches 98% when the assembly line is unattended.
The table height can be as low as 450mm and is designed for heavy goods weighing more than 50kg. Without lifting the goods can be smoothly connected to the conveyor line, the load-bearing capacity of up to 100kg/㎡, greatly reducing the labor intensity of operators.
| Parameter item | Specifications |
| Product Type | Automatic Side-Seal Strapping Machine |
| Applicable packing straps | PP/PET tape |
| Packing tape width | 5mm, 6mm, 9mm, 12mm, 15.5mm (adjustable) |
| Packing strap thickness | 0.55mm – 0.75mm |
| Packaging speed | Up to 60 straps/min (depending on frame size) |
| Maximum binding force | 5kg – 70kg (electronically adjustable) |
| Standard frame size | 600mm wide x 600mm high (customizable up to W1600mm x H2400mm) |
| Table height | 450mm – 850mm (adjustable) |
| Power specifications | 110V/220V/380V, 50/60Hz, 3-Phase |
| control system | PLC Control + Touchscreen HMI |
| Net weight of the fuselage | Approximately 220kg – 350kg |
| noise level | < 75 dB (A) |
Compared with manual and hand-held pneumatic tools: a double leap in efficiency and consistency
The biggest advantage of Automatic Side-Seal Strapping Machines is the continuity and standardization of its operations. When handling large quantities of heavy goods, compared with skilled workers using hand-held pneumatic balers, the single packaging cycle of this equipment is shortened to 1.5-2.5 seconds, and the overall production beat is improved by about 400. More importantly, it completely solves the common problem of “uneven tightening force” in manual packing, and ensures that the tension deviation of each strapping band is controlled within ± 5N through servo electric control technology, effectively avoiding the risk of loose packing or product damage caused by human fatigue.
Using the principle of lateral gravity, the problem of sliding belt and poor adhesion caused by wood chips, foam particles or ceramic dust falling into the movement is solved to ensure continuous and stable operation.
Aiming at the humid environment, the problem of electrical short circuit caused by water droplets or melting ice water directly flowing into the bottom motor and circuit board is solved, and the side seal structure effectively isolates the liquid.
For heavy objects above 50kg, the risk of work injury and cargo dumping caused by manual handling or machine jacking are solved, and the smooth transition of horizontal water flow is realized.
Suitable for plank or log strapping scenarios that produce a lot of sawdust dust. The dust-proof characteristics of the Automatic Side-Seal Strapping Machines ensure all-weather operation in a sawdust-flying environment without frequent downtime to clean the movement.
Specially designed to deal with dripping, frosting products packaging line design. The side seal structure prevents salt water from corroding the core components, and is suitable for rapid and hygienic automatic binding of seafood boxes and frozen meat boxes in low-temperature and high-humidity workshops.
For bricks, tiles and concrete products that produce abrasive dust. The machine’s highly wear-resistant components and side design can resist the invasion of abrasive dust and meet the high-load and heavy-weight packaging requirements of the building materials industry.
End packaging for large heavy goods such as refrigerators and washing machines. With its large frame customization capability and low-table conveyor system, it solves the problem of packaging large appliances directly on the wire body without additional manual assistance.
01
Open the right tape reel bin, load the PP/PET tape, and thread the tape into the tape storage box according to the schematic diagram. Turn on the power, the machine automatically completes the first tape delivery, and the preheating time only takes 20 seconds.
02
Set the target tension through the control panel knob (recommendation: carton 30kg, wooden box 60kg). Select “Auto” mode to enable photo-inductive triggering, or “Manual” for footswitch control.
03
Adjust the height of the Automatic Side-Seal Strapping Machines to be flush with the assembly line. Set the photoelectric sensor delay time to ensure that the binding action is triggered when the goods stay in the center of the frame.
04
After each shift, use an air gun to clean the dust from the side movement area. Check whether there is any residue on the hot head every week to ensure that the hot melt bonding efficiency is above 90% each time.
The movement of the bottom-sealed machine is located directly below the table top. Dust and debris will fall directly into the movement due to gravity and cause seizure. The side seal moves the movement to the side, and the debris will naturally fall to the bottom tray of the machine, greatly reducing the failure rate.
Yes. The Automatic Side-Seal Strapping Machines is equipped with input/output signal interfaces as standard, which can communicate with upstream and downstream conveyor equipment to achieve fully automated unmanned strapping operations.
In the standard frame size, the cycle speed of the high-performance model can reach 60 straps/min. The actual output speed depends on the package size and the number of packing lanes required for each package.
No need. As long as the carton size is within the frame specifications (such as W850 x H600), the machine will automatically sense the goods and complete the strapping. However, if the package is very different, it is recommended to fine-tune the tension to prevent the small package from being damaged.
The main wearing parts include heater blade, middle knife and cutter. Under normal use and maintenance, the life of the hot head is usually 50-800000 strapping cycles and the cutter is about 1 million cycles.
Soonqian